磁转子驱动的高速水循环去除PVA的速度比静止的水要快得多——即使是从难以到达的空腔中。所以你有你的零件后处理和准备使用尽快。
PVA去除站每次打印只需要几分钟的操作员时间，几乎不需要维护。只需按下启动按钮。让它旋转。准备好后收集你的指纹。
根据零件的易损性，选择100或225 RPM循环。每两分钟，转子就会改变方向，将水均匀地推到模型上。
一个漂洗篮保持您的打印在适当的地方，完全淹没，而溶解，然后提出了无混乱的排水和打印删除。
一个透明的，发光的容器，让您轻松地遵循PVA去除过程，并看到当您的部分准备就绪。另外，饱和度指示器显示何时刷新水。
13.7 liters (3.6 US gal)
W 200 x D 230 x H 165 mm
(W 7.8 x D 9 x H 6.4 in)
Optimized for: PLA and PVA
Also suitable for: PETG, Tough PLA, Nylon, or CPE in combination with PVA
(Also supports equivalent third-party materials)
Water
225 RPM (normal)
100 RPM (low)
< 50 dBA
W 303 x D 325 x H 374 mm
(W 11.9 x H 12.8 x D 14.7 in)
W 303 x D 325 x H 528 mm
(W 11.9 x D 12.8 x H 20.8 in)
6.35 kg (14 lbs)
4.2 kg (9.3 lbs)
W 400 x D 400 x H 500 mm
(W 15.7 x D 15.7 x H 19.7 in)
8.5 kg (18.7 lbs)
15 - 32 °C (59 - 90 °F)
0 - 32 °C (32 - 90 °F)
10 - 90% RH non-condensing
100 - 240 V AC
50 - 60 Hz
38 W
12 months
Market-leading technical support via email, phone, or from our global community is available to you in your language and timezone.
Online resources, extensive manuals, material technical and safety data sheets (in multiple languages), a detailed knowledge base, and much more.
